Vacancy Edu

16 Fully Funded PhD Position at Technical University of Denmark

Spread the love

16 Fully Funded PhD Position at Technical University of Denmark

 

 

(01) Fully Funded PhD Position

PhD position summary/title: In the project BIocompatible Retinal prosthesis for restoring visual computations in blinding Diseases (BIRD), we are looking for a talented PhD candidate for the microfabrication of a photovoltaic implant for partial restoration of the vision of blind people. In this Exploratory Interdisciplinary Synergy project funded by the Novo Nordisk Foundation you will work in close collaboration with neuroscientists at Aarhus University. 

Deadline of PhD Position: 19 March 2021

View details

 

(02) Fully Funded PhD Position

PhD position summary/title: The PhD project will focus on the design, synthesis, and characterization of new types of metal-organic network structures to be employed as electrocatalysts. This includes also the elucidation of structural and physical properties, and electronic structures. A significant fraction of the experiments will be performed at international large-scale facilities (synchrotron and neutron sources) in Europe and in the US. The project will have significant impact on the understanding of novel electronically conductive and electroactive MOFs, and the correlations between chemical and electronic structures and the ensuing MOF properties. Active dissemination of the obtained results, in scientific articles and through participation in international conferences, is an integral part of the job. The project is a part of a collaboration with Uppsala University and will involve extended stays in Prof. Sascha Ott’s group.

Deadline of PhD Position: 20 March 2021 

View details

 

(03) Fully Funded PhD Position

PhD position summary/title: If you have competences in solid state physics, crystallography in particular, and have a knack for scientific computing, we have the position that will allow you to hone your skills and apply them to exciting new materials for the next generation of solar cells. We work at the forefront of crystallographic methodology with a technique that allows mass identification and refinement of crystal structure of hundreds of individual grains in situ. This holds the potential for revolutionizing materials science for many functional materials, not only solar cells, and you can be part of this exciting development

Deadline of PhD Position: 21 March 2021

View details

 

(04) Fully Funded PhD Position

PhD position summary/title: You will distribute squeezed and entangled states between two locations within DTU’s campus and also down-town Copenhagen. Furthermore you will demonstrate CV-QKD between those locations. The PhD project includes an external stay at an international research institution, and you will work together with partners from the EU Quantum Technology Flagship projects Uniqorn and CiViQ as well as OpenQKD.

Deadline of PhD Position: 28 March 2021

View details

 

(05) Fully Funded PhD Position

PhD position summary/title: We seek a highly qualified and strongly motivated PhD student for research on electromagnetic field theory analysis for extreme dielectric confinement of light.  This PhD project aims at a rigorous understanding of light confinement on basis of the electromagnetic field theory; in addition, it will pursue microwave experiments exhibiting phenomena that also exist, but are more difficult to observe, in optics.  It will include the study of canonical solutions and wave phenomena with strong light confinement, the analysis of fundamental radiation and scattering problems exhibiting extreme dielectric confinement, the study of proper measures for quantifying field/light confinement, and the design, implementation and execution of experiments in the microwave frequency range

Deadline of PhD Position: 28 March 2021

View details

 

(06) Fully Funded PhD Position

PhD position summary/title: A PhD position on data science is available at the National Institute of Aquatic Resources at the Technical University of Denmark (DTU Aqua) from May 2021.  The position is part of the EU H2020 project MISSION ATLANTIC: Towards the Sustainable Development of the Atlantic Ocean

Deadline of PhD Position: 30 March 2021

View details

 

(07) Fully Funded PhD Position

PhD position summary/title: The PhD project will be part of the research area focusing on Sustainable Entrepreneurship and Innovation at DTU Entrepreneurship. The research area studies the contribution of entrepreneurship and innovation to the achievement of the United Nations Sustainable Development Goals (SDGs), by investigating the individual, firm, industry, and regional determinants of sustainable entrepreneurship and innovation, and the regulatory stimuli for entrepreneurship and innovation to achieve the SDGs.

Deadline of PhD Position: 31 March 2021

View details

 

 

(08) Fully Funded PhD Position

PhD position summary/title: Centre for Ocean Life (www.OceanLifeCentre.dk) offers a 3-year PhD fellowships in trait-based modelling of microbial life in the ocean. The fellow will be employed at DTU Aqua (The National Institute for Aquatic Resources, Technical University of Denmark)

Deadline of PhD Position: 31 March 2021

View details

 

(09) Fully Funded PhD Position

PhD position summary/title: We invite applications for a 3-year PhD position to join an exciting research group in the field of “Development of Sustainable Materials for Construction 3D Printing” to work on a project where the goal is to develop a new eco-friendly and intelligent composite material system to overcome the limitations of existing 3D printable concrete materials. Additionally, to open the doors for better structure designs and performance, we will add bio-inspired approaches and adapt them with different configurations and structures to enhance the crack-resistance properties, energy absorption, toughness, or blast resistance. 

Deadline of PhD Position: 1 April 2021

View details

 

(10) Fully Funded PhD Position

PhD position summary/title: We offer a PhD fellowship at Department of Biotechnology and Biomedicine (DTU Bioengineering) at the Technical University of Denmark. The PhD project is part of the Center for Microbial Secondary Metabolites, CeMiSt and will be carried out in the Bacterial Interactions and Evolution Group headed by Professor Ákos. T. Kovács in the Section for Microbial and Chemical Ecology.

Deadline of PhD Position: 4 April 2021

View details

 

(11) Fully Funded PhD Position

PhD position summary/title: We are looking for a PhD student interested in developing their skills in genomics and fisheries management to participate on the BiodivERsA funded project: Biodiversity on the run: evolutionary and socio-economic consequences of shifting distribution ranges in commercially exploited marine fishes (GenClim).

Deadline of PhD Position:  5 April 2021 

View details

 

(12) Fully Funded PhD Position

PhD position summary/title: The CoaST Research Centre at DTU Chemical Engineering, in collaboration with The Department of Fibre & Polymer Technology at KTH Royal Institute of Technology, seeks a qualified candidate for a vacant PhD position on bio-based anticorrosive coatings for the heavy industry

Deadline of PhD Position: 12 April 2021

View details

 

(13) Fully Funded PhD Position

PhD position summary/title: DTU Management’s Transport Division would like to invite applications for a 3-year PhD position starting no later than June 1st, 2021. The successful candidate will join the Machine Learning for Smart Mobility Group and will work under the supervision of Associate Professor Carlos Azevedo and Senior Researcher Sonja Haustein in collaboration with the Faculty of Medicine of the University of Lisbon.

Deadline of PhD Position: 15 April 2021

View details

 

(14) Fully Funded PhD Position

PhD position summary/title: We seek a PhD candidate for synthesis, preparation, and materials processing of new metal oxides thin films to fabricate all Solid-State Batteries. This involves the synthesis of solid-state electrolyte materials and electrodes based on thin films devices with tailored microstructure and interfaces. Investigation of structurally defined sharp interfaces without impurities is an effective approach to develop low-resistance interfaces in batteries. Electrolyte/electrode interfaces fabricated without exposing the electrode surfaces to air provide an ideal platform to clarify intrinsic battery performance and this will be carried out using Pulsed Laser Deposition (PLD) and sputtering. The ultimate aim of this work is to fabricate a working micro solid-state-battery on Si. This promises a step-change in energy density and a reduction in battery volume.

Deadline of PhD Position: 20 April 2021 

View details

 

(15) Fully Funded PhD Position

PhD position summary/title: PhD positions, starting September 1st 2021 or as soon as possible after that, are available in the area of electrolyte thermodynamics. The duration of the position is three years.

Deadline of PhD Position: 1 May 2021

View details

 

(16) Fully Funded PhD Position

PhD position summary/title: This Ph.D. project will explore the latest advances within machine learning to enable nonlinear-distortion free communication over the optical fibre channel. It will be explored how to explore machine learning techniques to enable spectrally efficient and robust  optical communication systems covering ultra-wide band transmission (O+E+S+C+L band). More specifically, the application and efficient training for auto-encoders will be investigated.  The project will cover both algorithm development as well as experimental implementations. 

Deadline of PhD Position: 1 May 2021

View details

 

 

About University

The Technical University of Denmark (Danish: Danmarks Tekniske Universitet), often simply referred to as DTU, is a university in the town Kongens Lyngby, 12 kilometres (7.5 mi) north of central Copenhagen, Denmark. It was founded in 1829 at the initiative of Hans Christian Ørsted as Denmark’s first polytechnic, and it is today ranked among Europe’s leading engineering institutions.

DTU was founded in 1829 as the “College of Advanced Technology” (Danish: Den Polytekniske Læreanstalt). The Physicist Hans Christian Ørsted, at that time a professor at the University of Copenhagen, was one of the driving forces behind this initiative. He was inspired by the École Polytechnique in Paris, France which Ørsted had visited as a young scientist. The new institution was inaugurated on 5 November 1829 with Ørsted becoming its Principal, a position he held until his death in 1851.


The College of Advanced Technology’s premises in Sølvgade, completed 1889
The first home of the new college consisted of two buildings located in Studiestræde and St- Pederstræde in the center of Copenhagen. Although these buildings were expanded several times, they eventually became inadequate for the requirements of the college. In 1890 a new building complex was completed and inaugurated located in Sølvgade. The new buildings were designed by the architect Johan Daniel Herholdt.

 

Disclaimer : We try to ensure that the information we post on VacancyEdu.com is accurate. However, despite our best efforts, some of the content may contain errors. You can trust us, but please conduct your own checks too.

 

Related Posts

 

Leave a Comment