Chalmers University of Technology, Gothenburg, Sweden invites online Application for number of Fully Funded PhD Degree at various Departments. We are providing a list of Fully Funded PhD Programs available at Chalmers University of Technology, Gothenburg, Sweden.
Eligible candidate may Apply as soon as possible.
(01) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in electrocatalysis for sustainable reactions
The main purpose of this project is to develop new catalysts for the electrochemical reduction of CO2 into value-added chemicals such as ethylene and alcohols. Since most chemicals and fuels are derived from petrochemical processes today, implementing electroreduction of CO2 could reduce global demand for fossil fuels in the future. Despite major advances in the field, various challenges such as lack of stability and low selectivity are major barriers towards industrialization. New catalysts must thus be developed to reach high selectivity to specific products while maintaining high activity over a prolonged period of time.
Deadline : December 2, 2022
(02) PhD Degree – Fully Funded
PhD position summary/title: PhD student in multimode fiber optical transmission
We are looking for a PhD student that wants to be a part of an European project that aims at developing techniques that will charactrerize and use higher-order transverse modes in optical fibers. In this position you will work with transmission system experiments as well as theoretical aspects such as channel models and electromagnetic modelling of modes in various fiber types. You will get the opportunity to visit other partners within the project, both industrial and academic.
Deadline : November 30, 2022
View All Fully Funded PhD Positions Click Here
(03) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in performance evaluation of high-performing battery-based energy storages.
Our overall ambition is to contribute to a sustainable future. We aim to create a positive impact on the development of society, both environmentally, socially and economically. Research and education are performed in the areas of Communication and Antenna systems, Systems and Control, Computer vision, Signal processing, Biomedical Engineering and Electric Power Engineering. Our knowledge is of use everywhere where there is advanced technology with integrated electronics, no matter if it involves electricity, electrical signals, optical signals or microwaves. The department is a dynamic and international work environment with about 200 employees from more than 20 countries. We collaborate closely with both national and international academia, industry and medical researchers.
Deadline : November 27th, 2022
(04) PhD Degree – Fully Funded
PhD position summary/title: Join us – and share knowledge: The Department of Physics seeks five PhD students
The Department of Physics at Chalmers is looking for five PhD candidates worldwide who want to enter a doctoral program at the forefront of science. Our PhD students develop abilities to plan, perform, critically review, and present their research. The PhD studies prepare for a flexible career with many opportunities in academia, industry, and society. At the Department of Physics, you will be a member of one of our research groups and work in a vibrant international and interdisciplinary surrounding as a full-time employee.
Deadline : 28th November, 2022
Polite Follow-Up Email to Professor : When and How You should Write
(05) PhD Degree – Fully Funded
PhD position summary/title: PhD student in fuel cell electrode activity and stability
Proton exchange membrane fuel cells (PEMFCs) are currently being developed and deployed, e.g. by the automotive industry, as an alternative to fossil fuel combustion engines. In the fuel cell, chemical energy in a fuel, often hydrogen, is converted to electricity in an electrochemical reaction. Fuel cells with hydrogen as energy carrier has the potential to provide CO2-free and clean energy with zero emissions. However, fuel cells need to become cheaper, have longer lifetime and be composed of sustainable materials in order to be used on a truly large scale. This project will focus on material aspects of fuel cell electrodes with the aim to increase life time and minimize the use of scarce and expensive metals for the next generation of PEM fuel cells. The PhD position will be located at the division of Chemical Physics at the department of Physics. This position will be focused on experimental studies of new catalyst materials and degradation mechanisms of low-temperature PEM fuel cell catalysts and be conducted in close collaboration with other research groups in a dynamic and international environment striving for scientific excellence through teamwork between researchers active in the fields of catalysis.
Deadline : 28th November, 2022
(06) PhD Degree – Fully Funded
PhD position summary/title: PhD student position – Physics and Chemistry of Liquids for Next Generation Batteries
Would you like to work with us at Chalmers within a very challenging and ultimately rewarding project? Join our nice team at Materials Physics and Johansson Research Group to explore the physics and chemistry of new liquids enabling next generation batteries – a very hot and important area of science. Learn new experimental techniques and use your own creativity for liquid electrolyte concepts never seen before.
Deadline : 28th November, 2022
Click here to know “How to Write an Effective Cover Letter”
(07) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in fusion plasma physics
The aim of this PhD project is to develop theoretical and numerical models to simulate runaway electron dynamics in the presence of material injection and magnetic field perturbations, and to apply these models in order to seek runaway electron avoidance and mitigation methods for future high-current fusion devices. As a PhD student, you are employed by Chalmers and will receive a salary according to current salary agreements. A maximum of 20% of your time will be devoted to other duties than your PhD studies, mainly teaching. The remaining time will be devoted to your own courses and research within the research topic, and you are expected to obtain a PhD within a maximum of five years.
Deadline : 28th November, 2022
(08) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in theory of dynamics in quantum materials
You actively participate in theoretical research in the area of dynamics in quantum materials. Furthermore, you are active in joint work with national and international collaborators. This includes, e.g., presentations, discussions, as well as publications. Also, you present results at international conferences. You will be given the opportunity to widen your expertise through specialized courses or participating in international summer/winter schools. Moreover, you will be taking part in the supervision and teaching of Bachelor and Master students.
Deadline : 28th November, 2022
(09) PhD Degree – Fully Funded
PhD position summary/title: PhD student position – Processes and interfaces in solid state batteries
The goal of this PhD-project is to advance research and design of high-energy-density solid-state batteries, one of the most promising next generation technologies. In particular, the aim is to build an understanding on the processes taking place at the interfaces between the solid electrolyte and the electrodes. The main issue is to stabilize the interface between the Li-metal anode and the solid electrolyte, a bottleneck to advance from laboratory scale to real applications. In the project we combine design of materials and advanced characterization of interface evolution. The challenges is to follow processes in battery cells during operation and based on the knowledge design materials with a functionality on the nano-scale. In the project you will work on advanced characterization techniques in order to in real time follow processes in working battery cells. You will work with both spectroscopic methods in our own laboratories and with advanced x-ray scattering and imaging methods at large scale facilities, e.g. the Swedish national facility MAXIV. You will have resources and possibilities to access state-of-the-art experimental tools, to present your work to the national and international scientific communities. The work will be part of the national competence center BASE and internationally the Battery 2030+ project BIGMAP and part of an ongoing Swedish-Korean research collaboration.
Deadline : 28th November, 2022
(10) PhD Degree – Fully Funded
PhD position summary/title: PhD student for LCA of vehicle and electricity systems interaction
As a PhD student your will have a responsibility to pursue your own doctoral studies within the area of environmental systems analysis as well as to study doctoral courses. You are expected to work independently, have the ability to plan and organize your work, work in close collaboration with other researchers and partner industries, and to be able to communicate scientific results, both orally and in written form, in English. In addition to research and coursework, you are expected to take part in seminars and conferences, both national and international. The doctoral program is supposed to lead to the doctoral degree, equivalent to four years of full-time studies. However, since there are also teaching obligations, the position is expected to be five years in total.
Deadline : 2022-12-11
Connect with Us for Latest Job updates
(11) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in Neutron noise-based core monitoring in Small Modular Reactors
A PhD position in reactor physics is offered in the group ‘reactor physics, modeling and safety’ and relates to projects within the Swedish competence centre ANItA (Academic-industrial Nuclear technology Initiative to Achieve a sustainable energy future) integrating Swedish technical and nontechnical expertise of Uppsala University, Chalmers, KTH, Vattenfall, Uniper, Fortum, Westinghouse Electric Sweden, Studsvik Nuclear and the Swedish Energy Agency in nuclear technology and engineering. Collaborative research, development and education of the centre aims to create a Swedish knowledge and competence base needed for introduction of novel nuclear power technologies such as Small Modular Reactors (SMRs) and providing relevant information, in particular, to policymakers for timely decisions on the future Swedish energy generation mix. Within ANItA, the leading universities in Sweden collaborate with leading Nordic companies of the nuclear energy sector offering together a unique research environment and industrial application potential for doctoral students and postdocs with good opportunities for international partnership.
Deadline : 18th November, 2022
(12) PhD Degree – Fully Funded
PhD position summary/title: Ph.D student position in passive Direct Air Capture
The work aims at developing a novel “passive” DAC system. We will use cheap alkaline by-products that passively react with carbon dioxide in the air to form stable carbonates, e.g. CaCO3. Alkaline by-products from industry could likely be employed as raw materials in the process, which would increase circularity and integration of different industrial sectors. A significant fraction of such materials is generated globally as well as in Sweden, primarily from the steel and mining industry. The use of such cheap materials in combination with a system which does not need to actively treat enormous amounts of air directly in fans and blowers, could result in a much lower CO2-capture cost compared to normal systems, and hence play a significant role in a future scenario where massive Negative emissions will be needed. In order to achieve a significant carbonation rate, a simple system of stacked plates could be constructed. The spaces between the plates will allow for natural convective air flow. Furthermore, the passive DAC process can be coupled to a separate calcination stage whereby pure CO2 for storage is obtained, thus creating a cyclic process.
Deadline : 2022-11-20
List of Top 25 Free Statistical Analysis Software
(13) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in Mass transport of wood components in processed wood
This project is a part of Wallenberg Wood Science Center (WWSC), which is a research center striving for scientific excellence with a focus on new materials from trees. The center creates knowledge and builds competence for an innovative and sustainable future value creation from forest raw materials. WWSC is a multidisciplinary collaboration between KTH, Chalmers, and Linköping University. The base is a donation from Knut and Alice Wallenberg Foundation, and the forest industry is supporting WWSC via the national platform Treesearch.
Deadline : 24 november, 2022
(14) PhD Degree – Fully Funded
PhD position summary/title: PhD student in computer architecture acceleration of quantum simulation
This project is part of QuantumStack, a 5-year project funded by the Swedish Foundation for Strategic Research, with the aim of developing a full software stack for programming quantum computers. The project is integrated with the Wallenberg Centre for Quantum Technology (WACQT), a 12-year, billion-SEK initiative started in 2018 with the purpose of advancing Swedish academia and industry to the forefront of quantum technology, and to build a Swedish quantum computer. Our ambitious goal at Chalmers is to build this quantum computer with 100 superconducting qubits and to apply it to real computational problems that cannot be efficiently solved on a conventional computer. Such computationally hard problems are found, e.g., in optimization, quantum chemistry, materials science, machine learning, etc.
Deadline : 27th November, 2022
(15) PhD Degree – Fully Funded
PhD position summary/title: PhD Student – Human-Centred Production in the Future of Work
This PhD position is focused on future, human-centred work in manufacturing industry. In Industry 5.0, manufacturing jobs are becoming increasingly complex and digitalised, especially for front-line personnel. The workforces are aging, requiring massive upskilling and human-centred support technology. You will be part of an expert research team, developing methods and human augmentation tools for front-line employee support. You will use collaborative robots; augmented and virtual reality technologies (AR/VR); digital twins; and skills management tools to support decisions and upskilling of personnel. Typical projects include industrial case studies, e.g. assembly of electric vehicles. We seek excellence and impact, merging high academic excellence and industrial value. In SII-Lab, our internationally connected laboratory for human-centred manufacturing, you can test and demonstrate your ideas.
Deadline : 30 November, 2022
(16) PhD Degree – Fully Funded
PhD position summary/title: Three PhD student positions in Geometry Assurance
The Geometry Assurance & Robust Design Group, at the department of Industrial and Materials Sciences (IMS) and Wingquist Laboratory, conducts research on assembly modelling and analysis, robust design, variation simulation, tolerance optimization, heat transfer and use of inspection data for product and process control. The group consists of five senior researchers and 10-15 postdocs and PhD students. The research group has over the last decade produced a number of scientific results that have been transferred into commercial software products, today used in daily operation by a large number of engineers at several international companies. The research group has a large industrial network.
Deadline : 9 January, 2023
Top 14 Best Citation Manager 2022
(17) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in Industrial marketing and purchasing, focus on business models for energy storage and balancing in Sweden
The critical role of business models and of business model innovation has become increasingly recognized in recent years. In parallel, industrial markets have increasingly become described and analyzed as networks of business actors and their relationships. An important issue in the Swedish energy system is to handle electricity storage and balancing and therefore the technological development is intense in this area. In view of these developments, there is a need to consider how technologies and business models develop in tandem and how they rely on a broad range of interacting actors. The project aims at analyzing and designing network embedded business models for storage and balancing solutions based on emerging technologies and involving different types of industry actors. By describing and analyzing current and emerging technologies and business models the project will contribute to enhancing the viability of the various interrelated solutions that are needed to transform the Swedish energy system. The project addresses three levels of analysis: individual firms, business relationships and the industrial network in terms of the Swedish energy system and its key links to other contexts being crucial or storage and balancing.
Deadline : 30 November, 2022
(18) PhD Degree – Fully Funded
PhD position summary/title: Two open PhD positions in Sustainability and Complex Systems
At the division of Physical Resource Theory we develop knowledge for transitions to a sustainable future with a high quality of life for the global community. Our research focuses on the interactions between technology, society and nature. We use a systems perspective to perform interdisciplinary research including theory development, mathematical modeling, as well as quantitative and qualitative analysis. We aspire to pursue an active engagement and dialogue with society, through education, stakeholder interaction and support to decision makers. The division has around 50 staff members including faculty and PhD-students with diverse expertise, including engineers, natural and social scientists.
Deadline : November 17, 2022
(19) PhD Degree – Fully Funded
PhD position summary/title: Four (4) PhD student positions in dependent type theory in mathematics and computer science, Ref PAR 2022/1371
Third-cycle studies comprises four years of full-time studies and leads after a successful completion to a Degree of Doctor of Philosophy in Computer Science and Engineering. Those who are employed as doctoral students must primarily devote themselves to their doctoral education. However, a doctoral student may to a limited extent work with education, research and administration, so-called departmental service in a teaching or supporting role, which can be concentrated on certain parts of the year depending on the needs of the business in consultation with the student. Such work may, before the doctoral degree is completed, not cover more than 20 percent of full-time work over the study period. If departmental service is performed corresponding to 20 percent of full-time study time, the employment contract is extended by the corresponding period, which gives a total employment of five years.
Deadline : 2022-11-04
(20) PhD Degree – Fully Funded
PhD position summary/title: PhD student in realization of bioenergy systems with carbon capture
The announced position is within the project “Below zero – Responsible and adaptive realization of sociotechnical bioenergy systems with carbon capture and storage”. The project is part of the Graduate School in Energy Systems, which is funded by the Swedish Energy Agency and hosted by Linköping university. The project will employ two PhD students with strong interest in interdisciplinarity, that will collaborate actively. The current position is for an engineering student at the Division of Energy Technology at the Department Space, Earth and Environment at Chalmers University of Technology. The second position is for a social science student at the Department of Thematic Studies: Environmental Change, Linköping university (advertised elsewhere). Bioenergy with carbon capture and storage (BECCS) has been identified as a necessary technology for achieving climate policy targets. It involves capturing and storing CO2 absorbed by biomass from the atmosphere during its utilization. BECCS allows for cogeneration of net negative CO2 emissions, heat, power and fuels. In the Nordic countries we have ambitious emission targets, unique access to biomass resources, excellent infrastructure and technological know-how to realize BECCS on short notice.
Deadline : 2022-11-20
(21) PhD Degree – Fully Funded
PhD position summary/title: PhD student – Digital Twins and 3D Modelling of Production Systems
This position is within the field of industrial digitalisation applied to 3D modeling of sustainable production systems. You will develop advanced methods and tools for production systems design, planning and improvements using digital twins, 3D scanning and 3D modelling. You will use Augmented Reality and Virtual Reality technology to upskill personnel in industrial digitalisation to increase sustainability in manufacturing. You will work in industrial case studies with real-world data sets from for example production of electric vehicles to invent sustainable factories and workplace design solutions combining high academic excellence and industrial value. The position incudes developing solutions for decision support on factory and workplace design using programming skills for interactive 3D environments.
Deadline : 30 November, 2022
(22) PhD Degree – Fully Funded
PhD position summary/title: PhD student – IIoT and Data-driven Solutions for Green Production
This position is within the field of industrial digitalisation applied on sustainable production. You will focus specifically on data analysis and decision support to facilitate sustainable production. You will develop advanced approaches for environmental impact assessments and absolute sustainability of industrial systems, exploiting digital tools (such as digital twins and industrial IoT) to support the combined analysis of environmental data and production data. Environmental metrics and initiatives are often treated in isolation and not connected to design, planning and optimisation activities. Thus a better integration between environmental management and operations management is essential to ensure sustainable industrial development. Accordingly, the research will be anchored in a manufacturing setting with industrial collaborators, with the intent to create a direct impact on practice.
Deadline : 30 November, 2022
(23) PhD Degree – Fully Funded
PhD position summary/title: PhD student – Industrial AI for Smart Maintenance
This position is within the field of industrial digitalisation applied to smart and sustainable production. You will focus specifically on AI, machine learning, data analysis, and decision support for predictive maintenance activities within the Smart Maintenance concept. You will work in industrial case studies with real-world data sets to invent predictive maintenance solutions combining high academic excellence and industrial value. The position incudes developing solutions for decision support in predictive maintenance using programming skills in a data science application context.
Deadline : Open until filled
(24) PhD Degree – Fully Funded
PhD position summary/title: PhD student position within hemicellulose recovery through oxidative chemistry
We are looking for a PhD-candidate driven to work with recovery of underutilized components of forest biomass in the interdisciplinary group of Forest products and chemical engineering and within the framework of the graduate school of the Wallenberg Wood Science Center (WWSC) where research work and education rely on close collaboration between Chalmers, KTH and Linköping University.
Deadline : 15 november, 2022
(25) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in Nanocellulose Composites for Wearable Electronics
We are looking for a highly motivated PhD student to join our research group at Chalmers. You will be enrolled in the PhD student school of the Wallenberg Wood Science Center (WWSC) and closely collaborate with researchers at the participating universities, Chalmers, Linköping and KTH. The goal of your research will be to develop materials for wearable electronics with electrochemically triggered recyclability. You will develop methods for the preparation of composite materials comprising conjugated polymers and nanocellulose. Further, you will gain detailed understanding about how electrochemical processes influence the rheological and mechanical properties of your materials. You will then demonstrate how recyclability may be triggered with electrochemistry. You will work closely with several postdocs and PhD students in our group, as well as with several external collaborators, especially within WWSC.
Deadline : 15 november, 2022
(26) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in Materials for sustainable battery technology
The aim of the project is to pave way for next generation sustainable battery technology by building understanding of fundamental processes and based on that design new biobased materials for next generation batteries. In the project you will apply advanced characterization methods (spectroscopy and imaging techniques) to follow processes on the molecular level in real time in working battery cells. We will exploit unique possibilities to tailor bio-based materials for Na-, Zn, or Mg-metal batteries. This PhD-project gives you the opportunity to develop your ideas and to work on how to tailor nanostructure of electrodes and solid electrolytes using nanocellulose and bioploymers to obtain stable and reversible metal deposition during cycling. The project is part of the Wallenberg Wood Science Center (WWSC) where you will have the opportunity to collaborate with world leading experts on bioplymers and nanomaterials from wood raw materials. You will have resources and possibilities to access state-of-the-art experimental tools, the opportunity to be part of international collaborations and to present your work to the national and international scientific communities.
Deadline : 15th November, 2022
(27) PhD Degree – Fully Funded
PhD position summary/title: PhD student position – Bridging the gap between actinide recycling and nuclear fuel fabrication
Production of Gen IV fuel from recycled used nuclear fuel is a complicated and challenging task. It requires application of both chemistry and process techniques that meet high standards regarding both safety and product quality. In this project, we are working towards closing the nuclear fuel cycle in fourth generation nuclear systems with dedicated focus on production of novel nuclear fuels. In the project we will be aiming towards production of actinide containing nitride fuels produced by the internal gelation process as well as chemistry development for fuel production through novel 3-D printing techniques. The position relates to the large scale EURATOM project FREDMANS. In FREDMANS the main issues of advanced nuclear fuel recyclability is handled through dedicated work packages handling: advanced manufacturing, recyclability, waste management and industrial applications. Over all of these the red thread of safety concerns is held high. In addition, it is considered that the real safety of future nuclear systems are achieved by people with a complete and correct education where they have actually handled the materials and questions in reality. To support this the FREDMANS project has an extensive training and education work package where safety and an holistic view of the whole system is in focus.
Deadline :30 November, 2022
(28) PhD Degree – Fully Funded
PhD position summary/title: PhD student within WWSC: enzyme discovery and characterization
Wallenberg Wood Science Center (WWSC) is a research center striving for scientific excellence with a focus on new materials from trees. The center creates knowledge and builds competence for an innovative and sustainable future value creation from forest raw materials. WWSC is a multidisciplinary collaboration between KTH, Chalmers, and Linköping University. The base is a donation from Knut and Alice Wallenberg Foundation, and the forest industry is supporting WWSC via the national platform Treesearch. In this WWSC project, our goal is to study microorganisms that are able to grow on toxic plant defense molecules. These are part of the so-called extractive compounds that differ from typical plant cell wall polymers such as cellulose, hemicelluloses and lignin, and they are especially enriched in the bark of trees. Tree bark is an underutilized resource today, but by finding ways to sustainably modify/valorize its extractive compounds we can help make it a great source of valuable products to replace fossil-based ones. We have identified a new bacterial species able to grow on bark extractive compounds, and unraveling which enzymes this bacterium uses in the process will be a major part and starting point of the project.
Deadline :November 15, 2022
(29) PhD Degree – Fully Funded
PhD position summary/title: PhD student position: Closing the nuclear fuel loop- from waste to fuel
This PhD student position relates to projects within the Swedish Competence Centre ANItA (Academic-industrial Nuclear technology Initiative to Achieve a sustainable energy future), which integrates Swedish technical and nontechnical expertise of Uppsala University, Chalmers, KTH, Vattenfall, Uniper, Fortum, Westinghouse, Studsvik Nuclear and the Swedish Energy Agency in nuclear technology and engineering. Collaborative research, development and education of the centre aims to create a Swedish knowledge and competence base needed for the introduction of novel nuclear power technologies such as Small Modular Reactors (SMRs) and provide relevant information, in particular, to policymakers for timely decisions on the future Swedish energy generation mix.
Deadline : 30 November, 2022
(30) PhD Degree – Fully Funded
PhD position summary/title: PhD student within WWSC: enzymatic bioprocessing
The project involves molecular biology to clone and heterologously express genes of interest, protein production and purification, and detailed biochemical characterization of identified enzymes, including determination of substrate specificities using wood derived streams. Detailed structural and chemical characterization of the wood-derived streams will be an integrated part of the project. The project may also involve various systems biology approaches to identify new interesting enzymes to study. WWSC provides a network for collaboration with other researchers that are experts in different areas.
Deadline : November 15, 2022
(31) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in hyphenated rheological techniques
We are looking for a highly motivated PhD student with a passion for method development to join our research group at Chalmers. You will get to work on advancing the understanding of nanocellulose systems from a multiscale perspective in flow through working with or developing cutting edge rheological hyphenated techniques. Within the research group as well as withing the WWSC you will have numerous opportunities to expand the reach of your work through collaborations.
Deadline : 15 november, 2022
(32) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in DNP-NMR spectroscopy (Wallenberg Wood Science Center)
This call is for a PhD student who will have a key role in the development of characterization methods for heterogenous soft matter, in particular materials of wood-based origin. The focus will be NMR spectroscopy, adapted with the emerging dynamic nuclear polarization technique, using the only instrument of its kind so far in Scandinavia.
Deadline : 15 November, 2022
(33) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in Cellulose modification
The main part of the working time shall be devoted to the research project. As a PhD your are expected to work independently, formulate own ideas and discuss them with colleagues and the research team. During your education as a PhD student, you will apart from performing your research project be involved in teaching and reading courses. From a research perspective you will communicate results by publishing articles in relevant peer-reviewed international scientific journals and by participating to national and international meetings and conferences. Within the daily work as a PhD student, our ambition is that you find variation, interact and collaborate with colleagues at Chalmers and associated groups within the WWSC and Treesearch community.
Deadline : 15 November, 2022
(34) PhD Degree – Fully Funded
PhD position summary/title: Three doctoral students on Edge Computing
This project is funded with a Future Research Leaders SSF grant. You will work closely with the rest of the team members, and your supervisor Ahmed on some of the hardest (and most fun!) problems today in computer systems. The division of Computer and Network Systems where you will be employed has top-notch faculty and students covering all fields of computer systems. The department of computer science and engineering is one of the best computer science departments in Sweden and Europe.
Deadline : 10th November, 2022
(35) PhD Degree – Fully Funded
PhD position summary/title: PhD student position on interpretable conversational AI
The AAI group is a part of the Division of Vehicle Engineering and Autonomous Systems (VEAS) at the Department of Mechanics and Maritime Sciences (M2). At the M2 department we conduct fundamental and applied research in areas such as safety, energy efficiency and material optimization of sustainable technology solutions across all modes of transport. The VEAS division is one of seven divisions at the department. Our focus is on engineering of systems with applications in vehicles and robots. Our strengths are the knowledge of finding solutions to authentic problems, often with the aim to provide innovative solutions to problems of industrial and societal relevance, by means of theory, modelling, simulations, and experimental work. The division has 9 faculty members, 12 PhD students, and several post-docs and researchers. The main research areas are within energy-efficient, safe, and adaptive vehicles, and autonomous systems operating in unstructured environments.
Deadline : December 1, 2022
(36) PhD Degree – Fully Funded
PhD position summary/title: PhD student position in Millimeter-Wave Antenna Design for 6G telecommunication
The PhD position is placed at the Antenna Group, part of the Department of Electrical Engineering (E2) at Chalmers The Antenna Group is well known in Sweden and internationally for its scientific contributions to antenna systems for telecommunications, radars, satellites, astronomy and space sciences, as well as disruptive antenna technologies for new applications, such as 5G/6G, having resulted in successful spin-off companies Gapwaves and Bluetest. We offer international PhD courses where we extend the fundamentals in antennas to the cross-disciplinary fields, covering electronic devices, integrated circuits, signal processing, and digital communication. We also offer training and access to a new world-class experimental infrastructure, the Millimeter wave -THz antenna chamber, at Chalmers, and the Swedish National Infrastructure for Computing. Furthermore, we stimulate commercial exploitation of the results developed in the research projects through collaborations with industries and offer support of Chalmers innovation office for spin-off/start-up activities. At present, the Antenna Group has about 25 members from all over the world. The research and learning environment is international and English is the working language. We encourage personal health and well-being by organizing social events, providing annual wellness allowance to employees, and offering support from the international staff mobility office to newcomers from abroad, including help with the search for affordable student accommodation. A vast majority of our graduates successfully continue their professional careers in Swedish and European industry.
Deadline : 15 November, 2022
About Chalmers University of Technology, Gothenburg, Sweden –Official Website
Chalmers University of Technology is a Swedish university located in Gothenburg that focuses on research and education in technology, natural sciences, architecture, mathematics, maritime and other management areas.
The university was founded in 1829 following a donation by William Chalmers, a director of the Swedish East India Company. He donated part of his fortune for the establishment of an “industrial school”. Chalmers was run as a private institution until 1937, when the institute became a state-owned university. In 1994, the school was incorporated as an aktiebolag under the control of the Swedish Government, the faculty and the Student Union. Chalmers is one of only three universities in Sweden which are named after a person, the other two being Karolinska Institutet and Linnaeus University.
Disclaimer: We try to ensure that the information we post on VacancyEdu.com is accurate. However, despite our best efforts, some of the content may contain errors. You can trust us, but please conduct your own checks too.
Related Posts
- 41 PhD Degree-Fully Funded at University of Liverpool, Liverpool, England
- 26 PhD Degree-Fully Funded at University of Copenhagen, Denmark
- 29 PhD Degree-Fully Funded at Technical University of Denmark (DTU), Denmark
- 16 PhD Degree-Fully Funded at Chalmers University of Technology, Gothenburg, Sweden
- 07 PhD Degree-Fully Funded at Umea University, Sweden
- 13 PhD Degree-Fully Funded at Lund University, Scania, Sweden
- 20 PhD Degree-Fully Funded at Forschungszentrum Julich, Germany
- 37 PhD Degree-Fully Funded at Queen’s University Belfast, United Kingdom
- 12 PhD Degree-Fully Funded at Delft University of Technology (TU Delft), Netherlands
